Projects

Cuale

  • Introduction

    Commodity: High sulphidation epithermal gold mineralization /VMS target
    Location: Jalisco, Mexico
    Size: 97 km2
    Status: 100% Owned by Evrim
    Stage: Early Stage. Currently being re-evaluated as VMS target.

    Overview

    Cuale is 100%-owned by Evrim and comprised of a 232 square kilometre early stage exploration property prospective for high sulphidation epithermal gold mineralization. The project is located 185 kilometres west of Guadalajara and 35 kilometres southeast of Puerto Vallarta in the Cordillera Madre del Sur.

    Cuale was identified and staked under the Callinan Royalties Generative Alliance (now owned by Altius Minerals), and is subject to a 1.5% net smelter royalty (“NSR”) for precious metals and a 1.0% NSR for base metals payable to Altius Minerals. Cuale was identified and staked as part of the Company’s generative exploration program.

    The property is located within the Talpa de Allende area of Jalisco near Agnico Eagle Mines’ Barqueño project (645k oz gold and 38M oz silver) and Endeavour Silver’s Terronera project (42M oz silver and 436k oz gold). The area is close to infrastructure with roads and powerlines crossing the property.

    Regional Geology:

    The property is located within a complex accreted arc terrane that developed during the Mesozoic Era and that hosts the majority of volcanogenic massive sulphide (VMS) deposits in Mexico. The accreted arc terrane comprises an interbedded sequence of rhyolitic volcanics and volcaniclastics that are only weakly deformed. These units are intruded by the Cretaceous Puerto Vallarta batholith. The VMS deposits in the Cuale area are gold- and silver-rich and the most important mineralization developed to date comprises low sulphidation epithermal gold-silver deposits.

    The content of this page has been reviewed by Stewart Harris, P.Geo., Vice President, Technical Services for the Company. Mr. Harris is a Qualified Person as defined under the terms of National Instrument 43-101.

  • A total of 1,167 metres has been completed in four of the first five holes of a 10-hole drill program. The drill holes completed to date have intersected volcanic fragmental rocks, all of which have been variably altered and represents part of a significant hydrothermal system. Drill holes GLR18-01, GLR18-02 and GLR18-03 were designed to form a section beneath Trench 4 and intersected a 28 metre to 32 metre true thickness of quartz-hematite breccia from surface. The breccia is predominantly clast supported with 1.0 millimetre to 20 centimetre sub-rounded clasts of quartz with interpreted pyrophyllite/dickite and specular hematite in an earthy hematite matrix. This unit hosts the gold mineralization observed in trenching and drilling. Gold correlates with elevated silver, bismuth, molybdenum, lead and antimony. Beneath this unit is a 3.0 metre band of massive quartz and interpreted pyrophyllite/dickite alteration that has pervasively replaced an earlier tuff unit.

    Underlying this breccia is a 128 metre to 175 metre true thickness of felsic lithic tuff that is strongly altered by quartz, chlorite and pyrite explaining the strong resistivity targeted in these holes. The pyrite in this zone also coincides with a weak chargeability anomaly. Beneath this unit is a fine-grained crystal tuff with a true thickness of 20 metres to 28 metres with a zone of intense pyrite, chalcopyrite and chalcocite at the lithic tuff – crystal tuff contact. This contact is the location of the copper intersections in holes GLR18-01 and GLR18-02. At the base of the three holes is a coarse-grained tuff unit with abundant quartz eyes (5% to 20%) and strong quartz and chlorite with minor pyrite alteration.

    Drill holes GLR18-04 and GLR18-05 are step-out holes towards the north. These holes define a similar sequence of breccia and tuff units although the quartz-hematite altered breccia thickens to the north, increasing to a true thickness of 76 metres in hole GLR18-05. Unlike the first three holes, gold mineralization in GLR18-05 is only minor. The depth of oxidation increases to the north while the underlying lithic tuff unit thins notably.

    Additional targets include the North Dome area where a post mineral breccia contains 30% to 90% quartz altered clasts, up to 1.5 metres in size, that contain gold grades from below detection to 11.90 g/t gold (19 of 63 rock chip samples are greater than 0.25 g/t gold). The breccia is also believed to have sampled a mineralized zone beneath the surface representing a target at depth.

    Core samples were delivered to ALS Global in Guadalajara, Jalisco for sample preparation and to the ALS laboratory in North Vancouver for analysis. The Guadalajara and North Vancouver facilities have ISO/IEC 17025:2017 certification. Field duplicate samples, blank rock samples and certified reference materials were inserted into the sample sequence each at a frequency of one per 20 samples. Samples were assayed for gold by 30 gram fire assay and multi-element analysis by four-acid and ICP analysis.

  • The content of this page has been reviewed by Stewart Harris, P.Geo., Vice President, Technical Services for the Company. Mr. Harris is a Qualified Person as defined under the terms of National Instrument 43-101.

Subscribe

* indicates required
Country